|
|
|
|
|
PLS Classic Neugart-Style high precision in-line planetary servo gearhead ● for application with precise positioning requirements ● available in 5 sizes ● continuous torque ratings up to 1800 Nm (15930 lbin) ● ratios from 3:1 up to 100:1 in one piece housing ● very high input speeds permissible, up to 14000 rpm ● very low backlash, below 3 arcmin ● wide range of options available ● IP65/66 |
|
WPLS Classic Neugart-Style high precision right angle bevel-planetary servo gearhead ● for automation applications with precise positioning ● available in 5 sizes ● continuous torque ratings up to 1800 Nm (15930 lbin) ● ratios from 4:1 up to 100:1 in one piece housing ● high permissible input speed up to 8000 rpm ● very low backlash below 5 arcmin ● IP65/66 ● |
|
PLV The PLS performance with industry standard long piloted output ● for easy to replacement or upgrade of other non-performing units ● available in 5 sizes ● torque ratings up to 1800 Nm torque (15930 lbin) ● wide range of ratios up to 100:1 in one piece housing ● very high permissible input speeds, up to 14000 rpm ● very low, consistent backlash ● IP65/66 ● all gears case-hardened and honed ● |
|
WPLV The WPLS performance with industry standard long piloted output ● for easy replacement or upgrade of other non-performing units ● available in 5 sizes ● torque ratings up to 1800 Nm (16930 lbin) ● ratios from 4:1 up to 100:1 in one piece housing ● high input speed permissible ● low and consistent backlash over the life of the gearhead ● case-hardened and honed gearing ● |
|
PLE Classic high value economy in-line planetary gearhead ● reliable economical choice for many automation applications ● available in 5 sizes ● torque ratings up to 800 Nm (7080 lbin) ● ratios from 3:1 up to 512:1 in one piece housing ● consitent low backlash ● permissable peak input speeds up to 18000 rpm ● IP 54/55 ● case-hardened and honed gears ● 300000 hrs life ● |
|
WPLE High value economy right angle bevel-planetary gearhead ● for standard automation applications where right angle power flow is required ● available in 4 sizes ● continuous duty torque ratings up to 260 Nm (2300 lbin) ● ratios from 3:1 up to 512:1 in one piece housing ● IP54/55 ● case hardened and honed gears ● mounts virtually to any servo motor ● |
|
PLFE The PLE value and performance in a compact rotating flange design, based on ISO 9409 ● very compact and flexible mounting ● available in 3 sizes ● continuous torque rating up to 260 Nm (2300 lbin) ● ratios from 3:1 to 64:1 in one piece housing ● high input speed allowable; up to 13000 rpm ● low consistent backlash ● IP54/55 ● plasma case-hardened and honed gearing ● |
|
WPLFE The PLFE performance in right angle configuration ● rotating output flange based on ISO 9404 ● for automation applications where compact dimensions are a must ● available in 3 sizes ● torque ratings up to 260 Nm (2300 lbin) ● rated for 30000 hours L10 life ● ratios from 3:1 up to 64:1 ● IP54/55 ● consistent low backlash over the life of the gearhead ● case-hardened and honed gears ● |
|
PLS-HP Highest performance inline planetary gearhead available today ● for applications with highest requirements in accuracy, torque density, backlash ● available in 4 sizes ● torque ratings up to 1000 Nm (8850 lbin) ● ratios from 4:1 up to 64:1 ● high torsional stiffness low lost motion ● available also with less than 1 arcmin backlash ● integrated expansion chamber ● case-hardened and honed gears ● |
|
PLF-HP The HP high performance with the compact and flexible rotating flange output based on ISO 9404 ● compact space saving design ● very high stiffness ● extreme low backlash; smaller 1 arcmin optional ● available in 4 sizes ● torque ratings up to 1000 Nm (8850 lbin) ● IP 65/66 ● integrated expansion chamber facilitating high input rpm ● all gears case hardened and precision honed ● |
|
WGE Right angle 1:1 bevel gearhead ● facilitates a right angle power flow for the servo motor ● available in 3 sizes ● continous torque ratings up to 12 Nm (110 lbin) ● IP54/55 ● input speeds in excess of 8000 rpm ● |
|
PLS/E-R Pre- engineered gearhead + rack + pinion liner motion packages ● reliable drive sytems for automation applications requiring long linear travel ● value economy solutions with E-series (PLE, WPLE ) gearheads using precision spur racks ● high precision sytems using S-series (PLS, WPLS) gearheads with high precision, hardened ground, helical pinions and racks ● |
|
HONED GEARS Neugart gears are precision honed after case hardening. The honing brings following advantages: ● reduced noise ● virtually no wear ● no significant backlash increase over the life of the gearbox ● no contamination of the lubricant with wear particles ● higher speeds ● reduced friction ● increased load-ability and gear life●
|
|
4 PLANET Gears Neugart gearheads use optimized ratios / gears to allow for more than 3 planets ● 4 planets is the rule in the PLE line in some ratios up up to 5 planets ● increased number of planets means higher torque density ● longer gear life ● increased stiffness |
|
FULL NEEDLE BEARINGS All planet gears are supported / running on high density full needle bearings ● resulting in higher torque capability ● increased gearbox life (up to 30000 hrs ● increased reliability and customer value ● |
|
NIEC Neugart Integrated Expansion Chamber ● patented design eliminating the pressure rise ● allows for full torque at high speeds ● reducing seal wear ● virtually eliminating leakage ● ideal for high speed and or elevated temperature applications ● |
|
PCS Patented Precision Clamping system● secure connection of the motor shaft to the sun gear ● eliminates run out and hence vibration ● reducing seal wear ● transmittable high torque ● essay user friendly assembly process ● |
|
All Gears plasma case hardened Plasma case hardened gears● all gears are hardened including the ring gears ● higher load ability ● reduced wear ● higher transmittable torques ● consistent backlash ● |
| ||||||||||||
|
NEUGART servo-gearheads for automation - serving virtually all industries - |
| |||||||||||
|
Value, Features, Benefits - available only from NEUGART |
||||||||||||
|
|
||||||||||||
|
for
nearest
Neugart Sales Contacts click
icon above |
 |
|
NEWS
- |
|
|
 |
© NEUGART
USA LP Bethel Park. PA 15102 Phone 412
835-4154 Fx.: 412 835
4194 |
