Pinion & Rack lubrication system

1		gear box
2		pinion
3		felt gear
4		rack
5		hose connecting set
6		lubricator


	Fig.1 Fig.2 Fig.3 Fig.4

order code

Fig.

description

module

z

d

dk

d1

D

b1

L

I

G

g

6591228

1

felt gear,
straight toothed

2

19

38,0

42

12

-

25

-

-

-

11

6591229

2

felt gear for pinion, helical tooth system RH

2

18

38,2

42

12

-

25

-

-

-

11

6591218

3

felt gear for rack, helical tooth system LH

2

18

38,2

42

12

-

25

-

-

-

11

6591200

4

mounting shaft

2

-

-

-

12

30

25

60

10

M8

143

6591328

1

felt gear,
straight toothed

3

19

57,0

63

12

-

30

-

-

-

37

6591329

2

felt gear for pinion, helical tooth system RH

3

18

57,3

63

12

-

30

-

-

-

36

6591318

3

felt gear for rack, helical tooth system LH

3

18

57,3

63

12

-

30

-

-

-

36

6591300

4

mounting shaft

3

-

-

-

12

30

30

65

10

M8

147

The felt gear is suitable for lubricating even in places which are difficult to get at. It can be mounted in any position. The direction of the helix is matched to the engagement with the output shafts and the ground gears.
The lubricant is supplied through the central bore of the mounting shaft. The hose-connection is provided for making the connection to the lubricator. For feeding the grease/oil from the cup to the lubrication point, hoses with a max. length of 1.5 m can be used for grease and hoses with a max. length of 5 m for oil.
Greases from NLGI 00 to NLGI = can be measured out.

electronic-controlled lubricators 125 cm³

order code

picture

description

65 91 000

1

Lubricator, completely ready for mounting, filled with special grease Klüber Microlube GB0, including pipe clamp for attaching it, and reducer G1/4" to G1/8", 0.50 kg

65 91 001

1

Nitrogen pressure chamber
for replacement filling
(with batteries) as spare part

electronic-controlled lubricators 475 cm³

order code

picture

description

65 91 007

1

Lubricator, completely ready for mounting, filled with special grease Klüber Microlube GB0, including pipe clamp for attaching it, and reducer G1/2" to G1/4", 0.90 kg

65 91 017

1

Nitrogen pressure chamber
for replacement filling
(with batteries) as spare part

The function is based upon the grease gun principle. After starting the operation, a nitrogen gas is generated electronically which by means of a highly functional construction moves a piston causing the grease filling of 475 cub.cm to emerge uni-formly (not pulsatingly) at a constant pressure set to the desired dosage. Depending on the individual requirements, an emptying time of 1-2-3-6-12 or 18 months can be set by means of a micro-switch. It is possible to adjust the grease quantity even after starting the operation by changing the micro-switch position accordingly. Detailed mounting and operating instructions come with every shipment.
The transparent housing, which can be mounted in any position, permits the visual inspection of the available grease filling at any time. When completely empty, it can be refilled and used again. Only the nitrogen chamber and the batteries need to be replaced. A permanent signal lamp powered by four standard 1.5 V batteries confirms the activation of the lubricator.


	PRINT